The Sweat Equity Primer
By Bill Partsch


We all know what sinks and faucets are, but some people, especially those new to the game, may find the jargon of remodeling a tad overwhelming. Here, then, is a primer of terms used in kitchen and bath remodeling.

Backflow Preventer--a device that keeps water in the sink from going back into faucets where the spout pulls out and becomes a sprayer

Base Cabinet--a kitchen cabinet that goes on the floor, usually deeper and taller than a wall cabinet

Bidet--a bathroom fixture used to wash private parts; much more popular in Europe than the U.S., probably due to the fact that Americans customarily bathe every day

Built-in Appliances--those that are installed into a run of cabinets; as opposed to free-standing appliances, which slide into place; for example, a built-in oven would be mounted in a cabinet by itself, as opposed to an oven that is part of a stove

Cabinet Box--the chassis of a cabinet, the guts; if you took a cabinet, laid it on its back and took the door and the frame (if any) off of it, you'd be left with the cabinet box

Cathedral Arch--a style of raised panel door where the panel has a stylized arch at the top

Commercial Style--appliances that have the stainless-steel -clad look of those found in restaurants; normally more powerful than a typical home appliance, but not as powerful as restaurant equipment, especially in the case of cooking appliances (an important safety feature)

Custom Cabinets--cabinets that are made to order to a customer's exact specifications; usually with better-quality wood and more of an emphasis on personal craftsmanship; frequently the most expensive cabinets available

Cutout--a hole in a countertop, perhaps for a sink or access to recycling bins

Escutcheon--a plate that sits under the faucet on the rim of the sink; in a two-handle faucet, the handles sit on the escutcheon; in a single-lever faucet, the escutcheon covers unused holes on the sink

Face Frame--a wooden frame that is fixed to the front of a cabinet box; the term also refers to all cabinets that are manufactured with a frame

Flat Panel--a style of cabinet door consisting of a frame surrounding a flat panel so that the front of the panel is a little deeper than the frame

Frameless--cabinets manufactured with the door attached directly to the cabinet box, with no face frame. Frameless cabinets can be just as sturdy as framed cabinets-the sole difference is the style of construction

GFCI--short for ground-fault circuit interrupter; refers to a type of outlet that shuts itself off automatically if it gets wet, thereby avoiding shock or fire

Glazing--a pane of glass in a window; most windows sold today are at least double glazed, with two sheets of glass creating a sort of air sandwich

Gravity-Fed--a toilet that uses gravity to pull water through the trap and into the sewage system; the way toilets normally work, as opposed to a pressure-assisted toilet

Inset Door--a door that sits flush in the frame on front of the cabinet

Kickspace--same as toekick

Laminate--what most people refer to as Formica (which is a brand name); a surfacing material consisting of paper and plastic pressed together under heat; in addition to Formica, brands include Wilsonart, Nevamar and Pionite

Lavatory--a bathroom sink

Mullion--a cabinet door with glass panes

Neo-Angle--a corner shower whose door is usually at a 45-degree angle to the walls

Pantry--in the cabinet industry, a cabinet that runs from the toekick up to the soffit

Pedestal Lav--a bathroom sink that sits atop a post of some sort, instead of being installed into a vanity top or mounted to the wall

Pressure-Assisted--a toilet that uses a sealed tank to trap air when the tank fills with water; the trapped air gives the water an extra push when the toilet is flushed

Pull--a cabinet or drawer handle, as opposed to a knob

Rail--the horizontal piece in a cabinet door frame, as opposed to a stile

Raised Panel--a style of cabinet door consisting of a frame around a panel that has been routed so that the panel and door frame are flush with each other

Semi-custom Cabinets--cabinets that fall somewhere in between stock and custom; in a nutshell, more options than stock at a lower price than true custom

Shim--a piece of wood (scrap usually) used to fill in small unseen gaps or to bring one corner of a cabinet, appliance or billiard table up so that the entire thing is level

Soffit--the area above the wall cabinets; some designs forego the soffit and take the cabinets all the way up to the ceiling

Solid surfacing--a material used for countertops and sinks that has the color running through its entire depth, making it easier to repair; made of polyester or acrylic with pigment added; brands include Corian, Gibraltar, Fountainhead, Avonite and Swanstone

Sones--a measurement of how much noise something makes; in kitchens and baths, this usually applies to ventilation fans

Bathroom Design Basics

Stile--the vertical piece in a cabinet door frame, as opposed to a rail

Stock Cabinets--cabinets that come in a set number of widths, finishes in doorstyles; the lack of options means manufacturers can keep a lot of them in stock and have them available for quick delivery; frequently, though not always, the least expensive cabinets available

Toekick--the small indented area between the base cabinets and the floor, sometimes called toespace or kickspace

Top--a countertop or vanity top, depending on the room

Trap--the s-shaped pipe right below a sink or in a toilet; water in the trap creates a seal between the house and the sewer system

Wall Cabinet--a kitchen cabinet mounted to the wall, usually shallower than a base cabinet

Whirlpool Bath--a tub fitted with jets that circulate water and/or air forcefully; sometimes referred to generically as a Jacuzzi, which is a brand name